Re: Distributed switch problem
Thanks, the issue came up for me in esxi 5.1. Remove hidden vmkernel port through command line and re-add kernels and iscsi bindings. ~ # esxcli network ip interface listvmk0 Name: vmk0 Enabled:...
View ArticleRe: Unable to get 10GB speeds between VM's
With coping a file, it's not only the network which is involved, but also the storage. To test network performance use a tool like Iometer. André
View ArticleRe: power-on network adapters script
Try something like this Get-Cluster-NameMyCluster|Get-VMrdclient*|Get-NetworkAdapter|where {!$_.ConnectionState.StartConnected} |Set-NetworkAdapter-Connected:$true-StartConnected:$true-Confirm:$false
View ArticleTech preview module configuration fails on Fedora 19 host /...
I have an Asus laptop (Intel Sandy Bridge i5 CPU) running Fedora 19. The tech preview installed successfully, but the module configuration step fails. I ran "vmware-modconfig --console --install-all"...
View ArticleFull Clone customisation fails
Hi there,We're running View 5.2 in a Proof of Concept (PoC) environment and are just starting to look at creating Full Clones. We have created multiple linked clone pools, both with and without guest...
View ArticleRe: Tech preview module configuration fails on Fedora 19 host /...
BTW, gcc version is gcc --versiongcc (GCC) 4.8.1 20130603 (Red Hat 4.8.1-1)
View ArticleRe: Get List of VMs, Datastores and Folder name per Cluster
Try something like this Get-VM|SelectName,@{N="Datastore";E={[string]::Join(',',(Get-Datastore-Id$_.DatastoreIdList|Select-ExpandPropertyName))}},@{N="Folder";E={$_.Folder.Name}}
View ArticleRe: Problem changing root password with Invoke-VMScript
Ok, that I understand.But since the VM is powered on, can you try the method from the thread I mentioned earlier ?
View ArticleRe: Replacing Existing Host with New Host/Hardware
You are on right track. As said , ensure you have an access to the datastores , and the network configurations ( VM port groups, VLAN if any, iscsi, vmotion etc ,. )You are good to go.
View ArticleRe: Can't set network adapter state
See my reply in Re: power-on network adapters script
View ArticleRe: power-on network adapters script
That did it I just added the login creds to get connected to the script like this. $cred = Get-Credential Connect-VIServer vcenter -Credential $credGet-Cluster -Name viewcluster | Get-VM rdclient* |...
View ArticleHow to tell if a ThinPC has connected to a VM
I have a program that runs the view client and does some error reporting via email. It watches the exit codes from the client to get an idea of what's going on, then emails me its hostname and IP if...
View ArticleClik here to view.
Re: Hang when rebuilding a new virtual disk
changhai wrote: $ while:;do clear; ls -l; sleep 1;done That command creates an infinite loop and when suggesting someone use one, then you should at the very least also tell someone that and how to...
View ArticleRe: backups halted after adding datastore
Do you see any error messages or just a locking issues
View ArticleRe: QueryChangedDiskAreas crashes for one VM
Wow, lots of new Messages since I last checked. Thx for spending so much time on my Problem. I will try to Experiment with all those hints, right now I'll answer a few things that come to my mind. I'm...
View ArticleRe: Benchmark Testing
There is a VMMark appliance from VMware (Benchmark the performance) you could use that VMmark Virtualization Benchmarks
View ArticleFusion cannot find Boot Camp
I try to boot my newly installed Boot Camp Windows 7 within Vmware Fusion 5. I get the message: "No Boot Camp disks found". It seems that Fusion cannot find the Boot Camp partition. However, the Boot...
View ArticleRe: ESXi 5.1 vMotion migration of VM with 2 vmdk: one on SAN storage and...
You can use the powercli to edit the vmx configuration file (offline)
View Article
